Fanuc A98L-0031-0025, 6 Volt, 2900 mAh, Panasonic BR-2/3AGCT4A programmable logic controller replacement battery pack

The Fanuc A98L-0031-0025 / Panasonic BR-2/3AGCT4A replacement battery pack is a 4 cell lithium primary battery designed to work in Fanuc 18-T series programmable logic controllers and robot controllers and Fanuc ALPHA iSV, BETA iSV and BETA iSVSP CNC system amplifiers.

This Fanuc A98L-0031-0025, Panasonic BR-2/3AGCT4A replacement battery pack is constructed of genuine Panasonic BR-2/3AG cells and the same connector as the OEM and is proudly made in the USA (these are not Chinese replicas).

Specifications
  Voltage: 6.0
  Capacity: 2900 mAh
  Color: Yellow Heat Shrink
  Size: 1.80" x 1.38" x 1.33"
  Contacts: OEM Wire Leads Connector
  Type: Lithium

Replaces
  A06B-6114-K504
  A98L-0031-0025
  BR-2/3AGCT4A

Also see our generic replacement BR-2/2AGCT4A battery pack

PLC / CNC definitions

PLC: Programmable Logic Controller - A programmable logic controller is a digital computer used for automation of industrial processes, such as control of machinery on factory assembly lines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.

CNC: Computer Numeric Control - The abbreviation CNC stands for computer numerical control, and refers specifically to a computer "controller" that reads G-code instructions and drives a machine tool, a powered mechanical device typically used to fabricate components by the selective removal of material. CNC does numerically directed interpolation of a cutting tool in the work envelope of a machine. The operating parameters of the CNC can be altered via a software load program.

DCS: Distributed Control System - A distributed control system refers to a control system usually of a manufacturing system, process or any kind of dynamic system, in which the controller elements are not central in location (like the brain) but are distributed throughout the system with each component sub-system controlled by one or more controllers. The entire system of controllers are connected by networks for communication and monitoring. DCS is a very broad term used in a variety of industries, to monitor and control distributed equipment.